各位前辈好,我是一个刚接触6688的新手.
刚才下载了这个截图工具,选择了对应的COM端口,速率也和驱动设置的一样,奈何始终无法连接到手机.
于是在GSMHosting的一个帖子里找到了截图工具作者(rizapn)对软件的说明:
After patching one of them, you need HyperTerminal or any other software like that (which providing a raw connection to the serial interface --for this, you can try my capturer software or the ones created by Acid--). Normally, you need to set the s/w baudrate to 19200, but if you patch your phone using mamaich patch, you can increase the speed to 57600.
根据作者的意思,在默认情况下,把数据速率调到19200即可.
于是...
在选择Type 2之后成功截图